I’m getting a STOP 0x00…error Blue Screen of Death in my Windows XP computer. How can I fix/repair or troubleshoot this blue screen?
Well in this technology advanced world – graphics and visual effects are manipulated with the help of blue screen background, whether a weather channel forecast news or graphics rich science fiction movie.
But you might be thinking why the hell your computer/laptop screen has frozen with the blue screen displaying STOP followed by a series of zeroes and upper cased ERROR message. What’s wrong with your PC? It has been working well before and started a down turn in performance lately and you’ve just got this blue screen!!!!
Blue screen IRQL_NOT_LESS_OR_EQUAL
This error message is issued if paged memory (or invalid memory) is accessed when the IRQL is too high. The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.
To resolve an error: Restart your computer, press F8 at the character-mode menu that displays the operating system choices. At the resulting Windows Advanced Options menu, choose the Last Known Good Configuration option.
If this doesn’t fix up your blue screen, then I would suggest using Reimage. With Reimage you can fix all the blue screens, without a need to reformat/re-install. Reimage is an online PC repair solution that would repair your system within 30 minutes. It is an all in one combination of antivirus, antispyware, registry cleaner and full PC repair.
Reimage reinstalls the operating system without touching user data or applications. Reimage is the only product in the world that can correct the damage a virus has caused (as opposed to anti virus software that simply remove viruses but don’t correct that damage) Reimage is the only technology in the world that can fix your PC even after it is already damaged.
Below are the list of descriptions to blue screen error messages. Reimage>
Blue screen: UNKNOWN_HARD_ERROR
Stop 0xc0000218 error message
Meaning that a necessary registry hive file could not be loaded. This error message can occur if the file is corrupt or missing. Reimage will fetch a replacement from its web storage and fix it.
Blue screen: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Blue screen: BAD_POOL_CALLER
An invalid pool request has been made by the current thread.
Blue screen: INVALID_KERNEL_HANDLE
A device driver likely has a bug.
Blue screen: CRITICAL_SERVICE_FAILED
Bug Check 0x5A: CRITICAL_SERVICE_FAILED
A critical service failed to initialize while starting the LastKnownGood control set.
Blue screen: CRITICAL_OBJECT_TERMINATION
This indicates that a process or thread Crucial to system operation has unexpectedly exited or been terminated.May happen due to some corrupted system files.
Blue screen: DISORDERLY_SHUTDOWN
An application or device driver likely has a bug.
Blue screen: BAD_SYSTEM_CONFIG_INFO
This error can occur if some critical registry keys and values are not present. Also error can occur if RAM is damaged .
Blue screen: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Often this is caused by a bad device driver that is using an improper address. Other possibilities are faulty or mistmatched ram or a corrupted pagefile.
Blue screen: VIDEO_DRIVER_INIT_FAILURE
The system was not able to go into graphics mode because no display drivers were able to start. This usually occurs when no video miniport drivers are able to load successfully.
Blue screen: CRITICAL_SERVICE_FAILED
A critical service failed to initialize while starting the LastKnownGood control set. Probably a corrupted registry file.
Blue screen: MACHINE_CHECK_EXCEPTION
Blue screen: KMODE_EXCEPTION_NOT_HANDLED
STOP 0x0000001e KMODE_EXCEPTION_NOT_HANDLED in win32k.sys
STOP 0xC000021A Fatal System Error The Windows Logon Process terminated unexpectedly.
This behavior can occur if you downloaded the Backdoor.NTHack virus from a remote host into your computer. This virus is initiated by the Dl.bat file in the InetPubScripts folder.
Blue screen: THREAD_STUCK_IN_DEVICE_DRIVER
STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
STOP: 0x100000EA THREAD_STUCK_IN_DEVICE_DRIVER_M
This happens when the graphics adapter is caught in an infinite loop while it waits for the video hardware to become idle.
Blue screen: INACCESSIBLE_BOOT_DEVICE
This error often results from a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error. This error can also result from incompatible disk hardware.
Blue screen: KERNEL_DATA_INPAGE_ERROR
This stop message indicates that the requested page of kernel data from the paging file could not be read into memory. This Stop message is usually caused by a bad block (sector) in a paging file, a virus, a disk controller error, or failing RAM. In rare cases, it is caused when nonpaged pool resources run out. It is also caused by defective hardware.
Blue screen: PAGE_FAULT_IN_NONPAGED_AREA
occurs when requested data is not found in memory. The system generates a fault, which normally indicates that the system looks for data in the paging file. In this circumstance, however, the missing data is identified as being located within an area of memory that cannot be paged out to disk. The system faults, but cannot find, the data and is unable to recover.
Blue screen: UNMOUNTABLE_BOOT_VOLUME
The file system is damaged and cannot be mounted.
Blue screen: SESSION_HAS_VALID_POOL_ON_EXIT
This error is caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll, or a video driver.
STOP error 0x27 RDR_FILE_SYSTEM
One possible cause of this bug check is depletion of nonpaged pool memory. If the nonpaged pool memory is completely depleted, this error can stop the system. However, during the indexing process, if the amount of available nonpaged pool memory is very low, another kernel-mode driver requiring nonpaged pool memory can also trigger this error.
Blue screen: IRQL_NOT_LESS_OR_EQUAL
Indicates that a kernel-mode process or driver attempted to access a memory address to which it did not have permission to access. The most common cause of this error is an incorrect or corrupted pointer that references an incorrect location in memory.
Blue screen: DATA_BUS_ERROR
This stop message indicates that a parity error has been detected in system memory. This error is almost always caused by a hardware problem, so may not be fixed using Reimage repair – but may be caused by a faulty device driver attempting to access an address or a virus infected the Master Boot Record (MBR) – Reimage can solve that!
Blue screen: NTFS_FILE_SYSTEM
A problem occurred within NTFS.SYS, the driver file that allows the system to read and write to NTFS file system drives. There may be a physical problem with the disk, or an Interrupt Request Packet (IRP) may be corrupted. Other common causes include heavy hard drive fragmentation, heavy file I/O, problems with some types of drive-mirroring software, or some antivirus software.
Corrupted registry prevents Windows XP from starting
Windows Update client on the system was unable to receive a response from the Windows Update or the Microsoft Update Web site. This situation is usually caused by redundant programs running on the computer.
STOP 0x0000007B is prevents you from booting Windows in Safe Mode
You may receive a “Stop 0x0000007B” error message if your computer is infected with a boot-sector virus. Need to run Reimage repair.
Reimage is a modern age PC repair solution that uses a huge database or repository of over 25 million components of system files to compare to those which are missing or corrupt on your system. And on a brief analysis it will make the necessary corrections making your PC as good as a freshly installed one, only with all your files still there.
Fix all of your blue screen error messages now